Skip to content
Home > Series > DC > DA

DA Series

Compact RFI Line Filter with DC Inlet connector


UL Recognized
CSA Certified
TUV Approved

Catalog Data Sheet
Printer friendly version

  

DA Series

  • General purpose line filters for DC applications up to 125VDC.
  • Compact with a 3-pin inlet connector
  • Available in 3, 6, 10 and 15A versions
  • Flange mount with 1/4" or PCB terminals
  • Mates with a standard MOLEX* connector (HCS Series)

*MOLEX is a trademark of MOLEX Incorporated

Ordering Information

Available Part Numbers

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.

3DAF1 10DAF1
3DAS1 10DAS1
3DAFP 10DAFP
6DAF1 15DAF1
6DAS1 15DAS1
6DAFP 15DAFP

 

  

Specifications

Hipot rating (one minute):
  Line to Ground 2250 VDC
  Line to Line 1450 VDC
     
Rated voltage (max.): 125 VDC
     
Rated Current: 3 to 15A
   
   
Operating Ambient Temperature Range (at rated current Ir):
  -10°C to +55°C
In an ambient temperature (Ta) higher than +55°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45

Electrical Schematic

Accessories

GA310 - Custom connector assembly with 3, 36" long 18 gauge wires to mate with DA Series filter

MOLEX* Component Numbers:

03-12-1036: Connector housing to mate with DA Series
18-12-1222: Female Terminal (3 needed per housing)

*MOLEX is a trademark of MOLEX Incorporated

 

Case Styles

DAF1

Typical Dimensions:
  Mounting holes (2): .187 ±.008 [4.75 ± .20] Dia. 90º countersink for #4 flathead screw
  Load Terminals (2): .250 [6.35] with .07 [1.8] Dia. hole
  Ground Terminal (1): .250 [6.35] with .07 x .16 [1.8 x 4.1] slot

 

DAS1

Typical Dimensions:
  Load Terminals (2): .250 [6.35] with .07 [1.8] Dia. hole
  Ground Terminal (1): .250 [6.35] with .07 x .16 [1.8 x 4.1] slot

DAFP

Typical Dimensions:
  Mounting holes (2): .187 ±.008 [4.75 ± .20] Dia. 90º countersink for #4 flathead screw
  Pins (3): .031 x .06 ± .003

PC Board Layout

 

  

Recommended Panel Cutouts

DAF

DAS

.

Panel Thickness A Dim. ± .002 [.05]
0.031 - 0.052 [0.79 - 1.32] 1.260 [32.00]
0.046 - 0.068 [1.17 - 1.73] 1.350 [34.29]

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ±.010 (max.)
± .25
DAF1 2.15 1.12 0.81 1.575 1.98
54.61 28.45 20.57 40.01 50.29
DAS1 1.98 1.10 0.81 0.96* 1.41
50.29 27.94 20.57 24.38* 35.81
DAFP 1.54 1.12 0.81 1.575 1.98
39.12 28.45 20.57 40.01 50.29
* Max. dimension

Performance Data

Minimum Insertion Loss in dB:
Measured in closed 50 ohm system
     
Common Mode / Asymmetrical (Line to Ground)   Differential Mode / Symmetrical (Line to Line)
 
Current Rating Frequency - MHz
.05 .1 .15 .5 1 3 5 10 30 100 200
3A 6 9 11 26 41 48 52 55 46 22 16
6A 2 4 6 18 30 37 42 48 42 - -
10A - 1 4 8 14 25 30 36 38 21 11
15A - - - 3 5 13 19 25 29 10 14
 
Current Rating Frequency - MHz
.05 .1 .15 .5 1 3 5 10 30 100 200
3A - 4 7 16 18 37 47 50 43 31 36
6A - 4 7 19 21 27 40 53 41 - -
10A 2 4 6 17 22 23 32 48 38 30 26
15A - - 2 17 19 29 33 37 37 31 28

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
  Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.