Skip to content
Home > Series > IEC > EEAEEB

EEA, EEB Series

Including the EAS/EBS and EAH/EBH Models
Cost Effective Compact RFI Filter IEC Connector Package


UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet
Printer friendly version

  

EEA Series

  • Compact single stage EMI filter with IEC 60320-1 C14 inlet
  • Two element circuit provides basic attenuation
  • Same performance as the EF Series
  • Available in three terminal configurations
  • Supersedes EF Series

EEB Series

  • Compact EMI filter with IEC 60320-1 C14 inlet
  • Two element circuit provides extended attenuation
  • Extended differential mode performance
  • Available in three terminal configurations

EAS & EBS Models

  • Same performance as EEA and EEB Series
  • Snap–in mounting
  • Spade terminals

EAH & EBH Models

  • Same size as EEA and EEB
  • Minimal leakage current suitable for medical applications
  • Flange mounted
  • Spade terminals

Ordering Information

Available Part Numbers

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.

EEA Models EEB Models
1EEA1 1EEB1
1EEA2 1EEB2
1EEAP 1EEBP
3EEA1 3EEB2
3EEA2 3EEB2
3EEAP 3EEBP
6EEA1 6EEB1
6EEA2 6EEB2
6EEAP 6EEBP
10EEA1 10EEB1
10EEA2 10EEB2
10EEAP 10EEBP
EAS Models EBS Models
1EAS1 1EBS1
3EAS1 3EBS1
6EAS1 6EBS1
10EAS1 10EBS1
15EAS1 15EBS1
EAH Models EBH Models
1EAH1 1EBH1
3EAH1 3EBH1
6EAH1 6EBH1
10EAH1 10EBH1

 

  

Specifications

Maximum leakage current, each Line to Ground:
    EEA/EEB Models
EAS/EBS Models		 EAH/EBH Models
  @ 120 VAC 60 Hz .22 mA 2 µA
  @ 250 VAC 50 Hz .38 mA 5 µA
       
Hipot rating (one minute):
  Line to Ground   2250 VDC
  Line to Line   1450 VDC
       
Operating Frequency:   50 / 60 Hz
       
Rated voltage (max.):   250 VAC
       
Rated Current:   1A to 10A
   
Operating Ambient Temperature Range (at rated current Ir):
    -10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45

Electrical Schematic

Accessories

GA400: NEMA 5-15P to IEC 60320-1 C13 line cord

FA601: Insulating Shroud

 

 

 

EAS/EBS Models

Case Styles

EEA1, EEB1, EAH1 & EBH1

Typical Dimensions:
  Mounting holes (2): .132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
  Line Inlet (1) IEC60320-1 C14
  Terminals (2): .250 [6.35] with .07 [1.8] Dia. hole
  Ground Terminal (1): .250 [6.35] with .07 x .16 [1.8 x 4.1] slot

 

EEA2 & EEB2

Typical Dimensions:
  Mounting holes (2): .132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
  Line Inlet (1) IEC60320-1 C14
  Terminals (2): .250 [6.35] with .07 [1.8] Dia. hole
  Ground Terminal (1): .250 [6.35] with .07 x .16 [1.8 x 4.1] slot

 

EEAP & EEBP

Typical Dimensions:
  Mounting holes (2): .132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
  Line Inlet (1) IEC60320-1 C14
  PC board pins (3): .031 [.07] square, ± .003[.07]

 

EAS1 & EBS1

Typical Dimensions:
  Line Inlet (1) IEC60320-1 C14
  Terminals (2): .250 [6.35] with .07 [1.8] Dia. hole
  Ground Terminal (1): .250 [6.35] with .07 x .16 [1.8 x 4.1] slot

 

 

  

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ±.010 (max.)
± .25
EEA1, EEB1,
EAH1, EBH1		 2.15 1.12 0.81 1.575 1.98
54.6 28.4 20.6 40.01 50.3
EEA2, EEB2 1.54 1.12 0.81 1.575 1.98
39.1 28.4 20.6 40.01 50.3
EEAP, EEBP 1.54 1.12 0.81 1.575 1..98
39.1 28.4 20.6 40.01 50.3
EAS1, EBS1 2.20 1.15 .96 1.185 1.41
55.88 29.2 24.38 30.10 35.81

Recommended Panel Cutouts

EEA, EEB, EAH, EBH

Note 1: EEA1, EEB1, EAH1, EBH1 can be front or back mounted
Note 2: EEA2, EEB2, EEAP and EEBP can be back mounted only

EAS, EBS

Front Mount only

Panel Thickness G Dim. ± .002 [.05]
0.031 - 0.052 [0.79 - 1.32] 1.260 [32.00]
0.046 - 0.068 [1.17 - 1.73] 1.350 [34.29]

PC Board Layout

Performance Data

Typical Insertion Loss
Measured in closed 50 ohm system
EEA, EAS Models
1A

3A

6A

10A
EEB, EBS Models
1A

3A

6A

10A
EAH Models
1A

3A

6A

10A
EBH Models
1A

3A

6A

10A
Minimum Insertion Loss in dB:
Measured in closed 50 ohm system
     
Common Mode / Asymmetrical (Line to Ground)   Differential Mode / Symmetrical (Line to Line)
 
Current Rating Frequency - MHz
.01 .05 .1 .15 .5 1 5 10 30
EEA / EAS Models                  
1A 12 23 29 32 41 47 47 47 40
3A - 10 15 19 30 36 48 50 47
6A - 1 4 10 22 28 42 48 47
10A - 1 3 5 14 20 32 38 47
                   
EEB Models                  
1A 12 23 29 32 41 47 47 47 40
3A - 10 14 18 30 36 48 50 47
6A - 1 4 10 22 28 42 48 47
10A - 1 3 5 14 20 32 38 47
                   
EAH Models                  
1A 8 21 29 32 42 45 32 30 19
3A - 5 10 15 25 27 30 27 22
6A - - 5 6 19 21 24 20 15
10A - - 1 5 9 12 12 12 12
                   
EBH Models                  
1A 8 21 29 32 42 45 32 25 19
3A - 5 10 15 25 27 30 27 22
6A - - 5 8 17 20 24 23 18
10A - - - 3 8 12 12 12 12
 
Current Rating Frequency - MHz
  .5 1 1.5 3 5 10 30
EEA / EAS Models                
1A   1 9 19 32 42 45 40
3A   2 4 6 20 35 45 40
6A   2 4 6 6 24 40 40
10A   1 4 5 5 5 30 40
  Frequency - MHz
EEB Models .01 .15 .5 1 3 5 10 30
1A 1 3 14 23 41 47 50 44
3A 1 2 11 14 25 38 44 40
6A 1 2 10 14 20 33 42 40
10A 1 2 10 16 19 19 39 40
  Frequency - MHz
EAH Models       1 1.5 5 10 30
1A       5 13 28 32 25
3A       4 6 20 27 28
6A       2 5 19 25 27
10A       1 5 15 22 27
  Frequency - MHz
EBH Models     .15 .5 1 10 10 30
1A     1 10 18 30 31 31
3A     1 10 18 30 31 31
6A     1 10 18 30 31 31
10A     1 10 18 30 31 31

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
  Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.