| Compact RFI Filter with IEC Connector for Higher Frequency |
  
UL Recognized
CSA Certified
VDE Approved
15EJT - VDE rated at 10 amps, 250 VAC
20EJT - VDE rated at 16 amps, 250 VAC
Catalog Data Sheet  |
 |
EJT Series
The EJT Series is a power inlet filter designed to attenuate noise up to 1 GHz. This inlet uses an IEC 320/C14 input connector which gives it a maximum rating of 15 amps. The EJT series is flange-mounted with optional outputs of 1/4" terminals or wire leads. This product was designed to address the demand for more noise attenuation at higher frequencies in a compact inlet. Now also available with an IEC 320/C20 connector with a maximum rating of 20 amps.
*15EJT - VDE rated at 10 amps, 250 VAC, 20EJT - VDE rated at 16 amps, 250 VAC
Electrical Schematic
1-15 Amp
20 Amp
Resistor location for reference only |
Specifications
| Maximum leakage current, each line to ground: |
| |
|
1-15 Amp |
20 Amp |
| |
@ 120 VAC 60 Hz |
.22mA |
.20 mA |
| |
@ 250 VAC 50 Hz |
.38mA |
.40 mA |
| |
|
|
| Hipot rating (one minute): |
| |
line to ground |
2250 VDC |
1500 VDC |
| |
line to line |
1450 VDC |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
1A to 20A * |
| |
* refer to part number for rating |
| Minimum insertion loss in dB: |
| Line to ground in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
100 |
1000 |
|
| 1A |
27 |
33 |
40 |
59 |
65 |
65 |
61 |
14 |
| 3A |
22 |
30 |
34 |
57 |
63 |
69 |
61 |
10 |
| 6A |
13 |
21 |
27 |
51 |
60 |
65 |
69 |
14 |
| 10A |
7 |
14 |
21 |
43 |
52 |
61 |
61 |
14 |
| 15A |
4 |
10 |
15 |
38 |
48 |
63 |
63 |
14 |
| 20A |
- |
8 |
15 |
42 |
50 |
60 |
58 |
14 |
|
| Line to line in 50 ohm circuit |
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
100 |
1000 |
|
| 1A |
10 |
20 |
23 |
43 |
52 |
65 |
45 |
14 |
| 3A |
10 |
20 |
24 |
41 |
51 |
59 |
52 |
17 |
| 6A |
10 |
21 |
24 |
37 |
48 |
65 |
55 |
20 |
| 10A |
10 |
21 |
25 |
28 |
44 |
63 |
53 |
18 |
| 15A |
10 |
20 |
26 |
25 |
36 |
56 |
45 |
23 |
| 20A |
9 |
20 |
26 |
40 |
35 |
48 |
50 |
10 |
|
|
Case Styles
EJT1 (1-15 amp version)
| Typical Dimensions |
| Terminals (3) |
.250 |
Holes (2) |
.07 Dia. |
| 6.35 |
1.8 |
| Slot |
.07 x .16 |
Mounting Holes (2)
|
.132 Dia |
| 1.8 x 4.1 |
3.35 |
| |
|
with .260 x 90° countersunk for#4 Flathead Screw |
20EJT1
EJT8
| Typical Dimensions |
| Wire Leads (min.) : |
4.0 |
1-15A Wire Gauge: |
18AWG /UL1015 |
| 101.6 |
20EJT8
|
Recommended Panel Cutouts
1 to 15A
Tolerance ± .005 [0.13]
20EJT
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
F |
| (max.) |
(max.) |
(max.) |
(max.) |
(max.) |
(max.) |
1EJT1, 3EJT1,
6EJT1, 10EJT1,
15EJT1 |
2.87 |
1.19 |
0.875 |
1.575 |
1.98 |
|
| 72.9 |
30.2 |
22.2 |
40.0 |
50.3 |
|
|
1EJT8, 3EJT8,
6EJT8, 10EJT8,
15EJT8 |
2.23 |
1.19 |
0.875 |
1.575 |
1.98 |
0.295 |
| 56.6 |
30.2 |
22.2 |
40.0 |
50.3 |
7.5 |
|
| 20EJT1 |
3.8 |
1.350 |
1.18 |
1.654 |
2.087 |
|
| 96.52 |
34.29 |
29.99 |
42.01 |
53.00 |
|
|
| 20EJT8 |
3.2 |
1.350 |
1.18 |
1.654 |
2.087 |
|
| 81.28 |
34.29 |
29.99 |
42.01 |
53.00 |
|
|
Ordering and Design Information
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
