| Minimum Depth, Cost-effective Shielded Power Inlet Filter |
  
UL Recognized
CSA Certified
VDE Approved
15A versions are tested by Underwriters Laboratories
to US and Canadian requirements
and are
VDE approved at 10A, 250VAC
Catalog Data Sheet 
Printer friendly version |
|
|
 |
SRB Series
- Smallest depth Corcom RFI filter available
- Complete shield
- Wide range of capacitor values
- Attenuates coupled EMI up to 300MHz
- Minimal to low leakage current versions are suitable for patient and non-patient contact medical equipment.
- Full range of mounting and termination options including unique vertical and horizontal orientation slide in mounts eliminate the need for mounting hardware
Ordering Information
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
Capacitor ID / Value |
@ 120VAC
60Hz |
@ 250VAC
50Hz |
| |
Blank / None |
2µA |
5 µA |
| |
Q / 33pF |
2.1 µA |
3.65 µA |
| |
R / 100pF |
9.6 µA |
16.6 µA |
| |
S / 220pF |
19.2 µA |
33.2 µA |
| |
T / 330pF |
24.0 µA |
41.5 µA |
| |
W / 470pF |
0.04 mA |
0.07 mA |
| |
X / 1000pF |
0.07 mA |
0.13 mA |
| |
Y / 2200pF |
0.16 mA |
0.28 mA |
| |
Z / 3300pF |
0.24 mA |
0.42 mA |
| |
|
|
| Hipot rating (one minute): |
| |
Line to Ground |
2250 VDC |
| |
Line to Line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
15A |
| |
VDE rated at 10 amps |
| Operating Ambient Temperature Range (at rated current Ir): |
| |
|
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Capacitor Options
| Capacitor ID |
Capacitor
Value |
| Q |
33pF |
| R |
100pF |
| S |
220pF |
| T |
330pF |
| W |
470pF |
| X |
1000pF |
| Y* |
2200pF |
| Z* |
3300pF |
| *Not available in SRB8, SRBX or SRBY styles |
Electrical Schematic
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord
|
Case Styles
SRB1
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Terminals (2): |
.250 [6.35] with .07 [1.8] Dia. hole |
| |
Ground Terminal (1): |
.250 [6.35] with .07 x .16 [1.8 x 4.1] slot |
SRB2
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Terminals (2): |
.250 [6.35] with .07 [1.8] Dia. hole |
| |
Ground Terminal (1): |
.250 [6.35] with .07 x .16 [1.8 x 4.1] slot |
SRBP
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
PC board pins (3): |
.031 [0.7] square ±.003 [.07] |
SRBS1
| Typical Dimensions: |
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Terminals (2): |
.250 [6.35] with .07 [1.8] Dia. hole |
| |
Ground Terminal (1): |
.250 [6.35] with .07 x .16 [1.8 x 4.1] slot |
SRB8
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
SRBS8
| Typical Dimensions: |
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
SRBX8
| Typical Dimensions: |
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
SRBY8
| Typical Dimensions: |
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
|
|
|
PC Board Layout
Recommended Panel Cutouts
SRB1, SRB2, SRBP & SRB8
Note 1: SRB1 and SRB8 can be front or back mounted
Note 2: SRB2 and SRBP can be back mounted only
SRBS (Snap-In)
| Panel Thickness |
G Dim. ± .002 [.05] |
| 0.031 - 0.052 [0.79 - 1.32] |
1.260 [32.00] |
| 0.046 - 0.068 [1.17 - 1.73] |
1.350 [34.29] |
SRBX (Horizontal Slide-In)
SRBY (Vertical Slide-In)
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
±.015 |
(max.) |
| ± .388 |
| 15SRB1 |
1.75 |
1.13 |
0.96 |
1.580 |
2.04 |
| 44.45 |
28.70 |
24.38 |
40.00 |
51.76 |
|
| 15SRB2 |
1.54 |
1.13 |
0.96 |
1.58 |
2.04 |
| 39.12 |
28.70 |
24.38 |
40.00 |
51.76 |
|
| 15SRBP |
1.54 |
1.13 |
0.96 |
1.58 |
2.04 |
| 39.12 |
28.70 |
24.38 |
40.00 |
51.76 |
|
| 15SRBS1 |
1.75 |
1.13 |
0.96 |
1.19 |
1.41 |
| 44.45 |
28.70 |
24.38 |
30.10 |
35.81 |
|
| 15SRB8 |
0.95 |
1.13 |
0.96 |
1.58 |
2.04 |
| 24.13 |
28.70 |
24.38 |
40.00 |
51.76 |
|
| 15SRBS8 |
0.95 |
1.13 |
0.96 |
1.19 |
1.41 |
| 24.13 |
28.70 |
24.38 |
30.10 |
35.81 |
|
| 15SRBX8 |
0.95 |
1.11 |
0.89 |
1.35* |
1.41 |
| 24.13 |
28.2 |
22.61 |
34.29* |
35.81 |
|
| 15SRBY8 |
0.95 |
1.11 |
0.89 |
1.30* |
1.36 |
| 24.1 |
28.2 |
22.61 |
33.02* |
34.54 |
* maximum dimension |
SRBX8 Slide-In model
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
Q
|
R
|
S
|
T
|
W
|
X
|
Y
|
Z
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
|
|
|
|
|
| Capacitor ID |
Frequency - MHz |
| 1 |
5 |
10 |
50 |
100 |
300 |
|
| Q |
- |
- |
- |
- |
- |
20 |
| R |
- |
- |
- |
3 |
6 |
22 |
| S |
- |
- |
1 |
6 |
17 |
19 |
| T |
- |
- |
2 |
13 |
13 |
19 |
| W |
- |
2 |
4 |
18 |
13 |
20 |
| X |
- |
5 |
9 |
25 |
10 |
17 |
| Y |
1 |
10 |
15 |
20 |
8 |
22 |
| Z |
2 |
14 |
18 |
17 |
7 |
15 |
|
|
|
|
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
|
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
