| High Performance, Low Cost Filter Ideal for Appliance Equipment |
  
UL Recognized
CSA Certified
VDE Approved
Catalog Data Sheet  |
|
 |
WG Series
- Cost-effective
- Tubular design
- WGA, WGB and WGC versions designed to comply with leakage current for fixed appliances not easily moved from one place to another
- WGD, WGE and WGF versions designed to comply with leakage current requirements for appliances which may be easily moved from one place to another
- Available in a variety of styles
Ordering Information
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
|
A, B & C
Models |
D, E & F
Models |
| |
@ 120 VAC 60 Hz |
0.76 mA |
0.10 mA |
| |
@ 250 VAC 50 Hz
|
1.27mA |
0.20 mA |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
16 Amps |
| |
| Operating Ambient Temperature Range (at rated current Ir): |
| |
|
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Electrical Schematics
Style 1 and 3
Style 7 (RAST 5 Connector)
|
Case Styles
WG_1
| Typical Dimensions: |
| |
Terminals(5): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Mounting Stud(1): |
M8 x 1.25 |
WG_3
| Typical Dimensions: |
| |
Wire Leads(5): |
4.0 [101.6] min. 18AWG UL1015 |
| |
Mounting Stud(1): |
M8 x 1.25 |
| |
|
|
| Wire Colors: |
|
| |
L(2): |
Brown |
| |
N(4): |
Blue |
| |
U(1): |
Brown |
| |
Gnd: |
Green / Yellow |
| |
U(3): |
Blue |
WG_7
| Typical Dimensions: |
| |
Terminals(3): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
RAST 5: |
Unkeyed RAST 5 Header interface* |
| |
Mounting Stud(1): |
M8 x 1.25 |
* The RAST 5 interface mates with any two-position (keyed or unkeyed) TE Connectivity
Standard Power Timer connector or RAST 5 Positive Lock Mark III connector
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
| All Case Styles |
16WGA
|
16WGB
|
16WGC
|
16WGD
|
16WGE
|
16WGF
|
|
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
Differential Mode / Symmetrical (Line to Line) |
|
|
|
| Current Rating |
Frequency - MHz |
| .05 |
.1 |
.15 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
| 16WGA |
3 |
10 |
14 |
33 |
41 |
47 |
54 |
50 |
37 |
30 |
| 16WGB |
11 |
16 |
21 |
33 |
39 |
44 |
53 |
55 |
37 |
30 |
| 16WGC |
12 |
18 |
22 |
34 |
41 |
46 |
51 |
52 |
34 |
27 |
| 16WBD |
3 |
8 |
11 |
22 |
26 |
31 |
31 |
33 |
40 |
44 |
| 16WGE |
5 |
12 |
15 |
21 |
23 |
25 |
31 |
32 |
37 |
45 |
| 16WGF |
9 |
14 |
18 |
24 |
26 |
28 |
31 |
32 |
37 |
44 |
|
|
|
| Current Rating |
Frequency - MHz |
| .05 |
.1 |
.15 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
| 16WGA |
14 |
19 |
22 |
33 |
41 |
51 |
47 |
42 |
48 |
50 |
| 16WGB |
14 |
19 |
22 |
33 |
41 |
51 |
50 |
45 |
52 |
45 |
| 16WGC |
13 |
19 |
22 |
33 |
40 |
50 |
58 |
42 |
48 |
42 |
| 16WBD |
13 |
19 |
22 |
33 |
40 |
48 |
58 |
57 |
54 |
45 |
| 16WGE |
13 |
19 |
22 |
33 |
40 |
48 |
58 |
57 |
51 |
45 |
| 16WGF |
13 |
19 |
22 |
33 |
40 |
49 |
58 |
59 |
50 |
44 |
|
|
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
