Skip to content

L Series

Inductive Filtering Modular RJ Jacks


UL Recognized
CSA Certified

Catalog Data Sheet
Printer friendly version

  

L Series

  • Inductive filtering in standard RJ11, RJ45, or handset jacks.
  • Available with standard ferrite sleeve inductors or
    higher performance ferrite blocks
  • Available unshielded or shielded with board grounded
    shield or spring fingered panel ground interface

Available Part Numbers

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.

Inductor Filter
RJH-4L-B RJ45-6L-S
RJ11-2L-S RJ45-6L-B
RJ11-2L-B RJ45-8L-S
RJ11-4L-S RJ45-8L-B
RJ11-4L-B  
RJ11-6L-S  
RJ11-6L-B  
Inductor Filter and Shield
RJ11-2L2-B RJ45-6L1-S
RJ11-4L1-S RJ45-6L1-B
RJ11-4L1-B RJ45-6L2-S
RJ11-4L2-S RJ45-6L2-B
RJ11-6L1-S RJ45-8L1-S
RJ11-6L1-B RJ45-8L1-B
RJ11-6L2-S RJ45-8L2-S
RJ11-6L2-B RJ45-8L2-B

 

  

Specifications

Contacts:
  Material: Phosphor Bronze
  Plating: 50 microinches gold
  Barrier under plating: 100 microinches nickel
  Resistance  
  Initial: 20 milliohms max.
  After 500 mating cycles:) 30 milliohms max.
 
Ferrites:
  Type: High resistivity, nickel zinc ceramic
  Sleeves: Single-aperture cylinders
  Block: Multi-aperture rectangular prism
     
Shield Material: Tin-plated copper alloy
     
Housing Material: Glass-filled polyester (UL94V-0)
     
Dielectric Withstanding Voltage:  
Line to Line and Line to Ground: 1000 VAC for 60 seconds
 
Printed Circuit Board Retention:
Before Soldering 1 lb. minimum
After Soldering 20 lb. minimum
   

Typical Impedance in Ohms

Dimensions

Refer to our RJ Jack Dimensions page for all RJ Jack product dimensions

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
  Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.