Skip to content

N Series (RJ Jacks)

Low Profile Filtered Modular RJ Jacks


UL Recognized
CSA Certified

Catalog Data Sheet
Printer friendly version

  

N Series

  • Low profile SignalSentry filtered jack
  • Available with sleeve or block inductors
  • Available unshielded or shielded with board grounded shield or
    spring fingered panel ground interface.


Unshielded with Ferrite Block

Typical Impedance in Ohms

Available Part Numbers

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.

RJ11-6N-B RJ45-8N-B
  RJ45-8N-S
RJ11-6N3-B RJ45-8N3-B
  RJ45-8N3-S
  RJ45-8N4-B
RJ11-6N4-B RJ45-8N4-S

 

  

Specifications

Contacts:
  Material: Phosphor Bronze
  Plating: 50 microinches gold
  Barrier under plating: 100 microinches nickel
  Resistance  
  Initial: 20 milliohms max.
  After 500 mating cycles:) 30 milliohms max.
 
Ferrites:
  Type: High resistivity, nickel zinc ceramic
  Sleeves: Single-aperture cylinders
  Block: Multi-aperture rectangular prism
     
Shield Material: Tin-plated copper alloy
     
Housing Material: Black glass-filled polyamide
(STANYL TE250F3)
     
Dielectric Withstanding Voltage:  
Line to Line and Line to Ground: 1000 VAC for 60 seconds
 
Printed Circuit Board Retention:
Before Soldering 1 lb. minimum
After Soldering 20 lb. minimum

Dimensions

Refer to our RJ Jack Dimensions page for all RJ Jack product dimensions

USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
  Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.